| |
| |
 | | | |
|
TestTEK universal stand is aimed for initial monitoring, functional completeness, diagnostics and adjustment of electric drives of various brands: RemTEK, EPC, EPP, Atlant, Angstrem, AUMA, Rotork, Tula etc.
Connection to an electric drive is done by means of universal programmable digital inputs/outputs, signal receiver and actuator for 4-20 mA, RS-485 interface with ModBus RTI exchange protocol. Depending on connection diagram the stand is adjusted as per specific type of an electric drive. |
|
|
| |
|
Functions
|
| |
- control over electric drive through digital, analogue and interface signals in repeated - short term, short term and long term operation modes
- monitoring over electric drive alarm
- setting required movement cycles for resource testing
- displaying data on the electric drive received from alarm nets at LC and single displays of the station
- displaying graphs of the electric drive movement (torque, rate, position)
- keeping archive of testing data with displaying moving cycles
- adjustment of register structure and functions for digital alarms for specific type of an electric drive
- storing parameters for consequent replication and speeding up commissioning of the group of electric drives
|
|
Main Technical Parameters of Stand
|
| |
|
Rated supply voltage, V
|
380, 3 phases
|
|
Power supply to electric drive, V
|
380, 220
|
|
Capacity of the electric drive connected, kW
|
up to 7,5
|
|
Number of digital inputs for electric drive connection
|
8
|
|
Number of digital outputs for electric drive connection
|
4
|
|
Number of analogue inputs for electric drive connection, 4-20 mA
|
1
|
|
Number of analogue outputs for electric drive connection, 4-20 mA
|
2
|
|
Interface for electric drive connection
|
RS-485
|
|
Interface for computer connection
|
Ethernet, USB 2.0
|
|
| |
|
Special software is included in the scope of supply for the station.
|
|
| |
|
|
| |
|
|
|
